Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
postgres is the Postgres-XC database server. In order for a client application to access a database it connects (over a network or locally) to a running postgres instance. The postgres instance then starts a separate server process to handle the connection.
One postgres instance always manages the data of exactly one database cluster. A database cluster is a collection of databases that is stored at a common file system location (the "data area"). More than one postgres instance can run on a system at one time, so long as they use different data areas and different communication ports (see below). When postgres starts it needs to know the location of the data area. The location must be specified by the -D option or the PGDATA environment variable; there is no default. Typically, -D or PGDATA points directly to the data area directory created by initdb. Other possible file layouts are discussed in Section 17.2.
By default postgres starts in the foreground and prints log messages to the standard error stream. In practical applications postgres should be started as a background process, perhaps at boot time.
The postgres command can also be called in single-user mode. The primary use for this mode is during bootstrapping by initdb. Sometimes it is used for debugging or disaster recovery; note that running a single-user server is not truly suitable for debugging the server, since no realistic interprocess communication and locking will happen. When invoked in single-user mode from the shell, the user can enter queries and the results will be printed to the screen, but in a form that is more useful for developers than end users. In the single-user mode, the session user will be set to the user with ID 1, and implicit superuser powers are granted to this user. This user does not actually have to exist, so the single-user mode can be used to manually recover from certain kinds of accidental damage to the system catalogs.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
postgres accepts the following command-line arguments. For a detailed discussion of the options consult Chapter 17. You can save typing most of these options by setting up a configuration file. Some (safe) options can also be set from the connecting client in an application-dependent way to apply only for that session. For example, if the environment variable PGOPTIONS is set, then libpq-based clients will pass that string to the server, which will interpret it as postgres command-line options.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
Enables run-time assertion checks, which is a debugging aid to detect programming mistakes. This option is only available if assertions were enabled when Postgres-XC was compiled. If so, the default is on.
Sets the number of shared buffers for use by the server processes. The default value of this parameter is chosen automatically by initdb. Specifying this option is equivalent to setting the shared_buffers configuration parameter.
Note: The following description applies only to Postgres-XC
Specifies postgres server should run as a coordinator.
Sets a named run-time parameter. The configuration parameters supported by Postgres-XC are described in Chapter 17. Most of the other command line options are in fact short forms of such a parameter assignment. -c can appear multiple times to set multiple parameters.
Sets the debug level. The higher this value is set, the more debugging output is written to the server log. Values are from 1 to 5. It is also possible to pass -d 0 for a specific session, which will prevent the server log level of the parent postgres process from being propagated to this session.
Specifies the file system location of the data directory or configuration file(s). See Section 17.2 for details.
Sets the default date style to "European", that is DMY ordering of input date fields. This also causes the day to be printed before the month in certain date output formats. See Section 8.5 for more information.
Disables fsync calls for improved
performance, at the risk of data corruption in the event of a
system crash. Specifying this option is equivalent to
disabling the fsync configuration
parameter. Read the detailed documentation before using this!
Specifies the IP host name or address on which postgres is to listen for TCP/IP connections from client applications. The value can also be a comma-separated list of addresses, or * to specify listening on all available interfaces. An empty value specifies not listening on any IP addresses, in which case only Unix-domain sockets can be used to connect to the server. Defaults to listening only on localhost. Specifying this option is equivalent to setting the listen_addresses configuration parameter.
Allows remote clients to connect via TCP/IP (Internet domain) connections. Without this option, only local connections are accepted. This option is equivalent to setting listen_addresses to * in postgresql.conf or via -h.
This option is deprecated since it does not allow access to the full functionality of listen_addresses. It's usually better to set listen_addresses directly.
Specifies the directory of the Unix-domain socket on which postgres is to listen for connections from client applications. The default is normally /tmp, but can be changed at build time.
Enables secure connections using SSL. Postgres-XC must have been compiled with support for SSL for this option to be available. For more information on using SSL, refer to Section 16.9.
Sets the maximum number of client connections that this server will accept. The default value of this parameter is chosen automatically by initdb. Specifying this option is equivalent to setting the max_connections configuration parameter.
The command-line-style options specified in extra-options are passed to all server processes started by this postgres process. If the option string contains any spaces, the entire string must be quoted.
The use of this option is obsolete; all command-line options for server processes can be specified directly on the postgres command line.
Specifies the TCP/IP port or local Unix domain socket file extension on which postgres is to listen for connections from client applications. Defaults to the value of the PGPORT environment variable, or if PGPORT is not set, then defaults to the value established during compilation (normally 5432). If you specify a port other than the default port, then all client applications must specify the same port using either command-line options or PGPORT.
Print time information and other statistics at the end of each command. This is useful for benchmarking or for use in tuning the number of buffers.
Specifies the amount of memory to be used by internal sorts and hashes before resorting to temporary disk files. See the description of the work_mem configuration parameter in Section 17.4.1.
Note: The following description applies only to Postgres-XC
Specifies postgres server should run as a datanode.
Sets a named run-time parameter; a shorter form of -c.
This option dumps out the server's internal configuration variables, descriptions, and defaults in tab-delimited COPY format. It is designed primarily for use by administration tools.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The options described here are used mainly for debugging purposes, and in some cases to assist with recovery of severely damaged databases. There should be no reason to use them in a production database setup. They are listed here only for use by Postgres-XC system developers. Furthermore, these options might change or be removed in a future release without notice.
Forbids the use of particular scan and join methods: s and i disable sequential and index scans respectively, while n, m, and h disable nested-loop, merge and hash joins respectively.
Neither sequential scans nor nested-loop joins can be disabled completely; the -fs and -fn options simply discourage the optimizer from using those plan types if it has any other alternative.
This option is for debugging problems that cause a server process to die abnormally. The ordinary strategy in this situation is to notify all other server processes that they must terminate and then reinitialize the shared memory and semaphores. This is because an errant server process could have corrupted some shared state before terminating. This option specifies that postgres will not reinitialize shared data structures. A knowledgeable system programmer can then use a debugger to examine shared memory and semaphore state.
Allows the structure of system tables to be modified. This is used by initdb.
Ignore system indexes when reading system tables, but still update the indexes when modifying the tables. This is useful when recovering from damaged system indexes.
Print timing statistics for each query relating to each of the major system modules. This option cannot be used together with the -s option.
This option is for debugging problems that cause a server process to die abnormally. The ordinary strategy in this situation is to notify all other server processes that they must terminate and then reinitialize the shared memory and semaphores. This is because an errant server process could have corrupted some shared state before terminating. This option specifies that postgres will stop all other server processes by sending the signal SIGSTOP, but will not cause them to terminate. This permits system programmers to collect core dumps from all server processes by hand.
Specifies the version number of the frontend/backend protocol to be used for a particular session. This option is for internal use only.
A delay of this many seconds occurs when a new server process is started, after it conducts the authentication procedure. This is intended to give an opportunity to attach to the server process with a debugger.
The following options only apply to the single-user mode.
Selects the single-user mode. This must be the first argument on the command line.
Specifies the name of the database to be accessed. This must be the last argument on the command line. If it is omitted it defaults to the user name.
Echo all commands.
Disables use of newline as a statement delimiter.
Send all server log output to filename. In normal multiuser mode, this option is ignored, and stderr is used by all processes.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
Default character encoding used by clients. (The clients can override this individually.) This value can also be set in the configuration file.
Default data directory location
Default value of the DateStyle run-time parameter. (The use of this environment variable is deprecated.)
Default port number (preferably set in the configuration file)
Server time zone
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
A failure message mentioning semget or shmget probably indicates you need to configure your kernel to provide adequate shared memory and semaphores. For more discussion see Section 16.4. You might be able to postpone reconfiguring your kernel by decreasing shared_buffers to reduce the shared memory consumption of Postgres-XC, and/or by reducing max_connections to reduce the semaphore consumption.
A failure message suggesting that another server is already running should be checked carefully, for example by using the command
$ ps ax | grep postgres
or
$ ps -ef | grep postgres
depending on your system. If you are certain that no conflicting server is running, you can remove the lock file mentioned in the message and try again.
A failure message indicating inability to bind to a port might indicate that that port is already in use by some non-Postgres-XC process. You might also get this error if you terminate postgres and immediately restart it using the same port; in this case, you must simply wait a few seconds until the operating system closes the port before trying again. Finally, you might get this error if you specify a port number that your operating system considers to be reserved. For example, many versions of Unix consider port numbers under 1024 to be "trusted" and only permit the Unix superuser to access them.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The utility command pg_ctl can be used to start and shut down the postgres server safely and comfortably.
If at all possible, do not use SIGKILL to kill the main postgres server. Doing so will prevent postgres from freeing the system resources (e.g., shared memory and semaphores) that it holds before terminating. This might cause problems for starting a fresh postgres run.
To terminate the postgres server normally, the signals SIGTERM, SIGINT, or SIGQUIT can be used. The first will wait for all clients to terminate before quitting, the second will forcefully disconnect all clients, and the third will quit immediately without proper shutdown, resulting in a recovery run during restart.
The SIGHUP signal will reload the server configuration files. It is also possible to send SIGHUP to an individual server process, but that is usually not sensible.
To cancel a running query, send the SIGINT signal to the process running that command.
The postgres server uses SIGTERM to tell subordinate server processes to quit normally and SIGQUIT to terminate without the normal cleanup. These signals should not be used by users. It is also unwise to send SIGKILL to a server process — the main postgres process will interpret this as a crash and will force all the sibling processes to quit as part of its standard crash-recovery procedure.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
To start a single-user mode server, use a command like
postgres --single -D /usr/local/pgsql/data other-options my_database
Provide the correct path to the database directory with -D, or make sure that the environment variable PGDATA is set. Also specify the name of the particular database you want to work in.
Normally, the single-user mode server treats newline as the command entry terminator; there is no intelligence about semicolons, as there is in psql. To continue a command across multiple lines, you must type backslash just before each newline except the last one.
But if you use the -j command line switch, then newline does not terminate command entry. In this case, the server will read the standard input until the end-of-file (EOF) marker, then process the input as a single command string. Backslash-newline is not treated specially in this case.
To quit the session, type EOF (Control+D, usually). If you've used -j, two consecutive EOFs are needed to exit.
Note that the single-user mode server does not provide sophisticated line-editing features (no command history, for example). Single-User mode also does not do any background processing, like automatic checkpoints.
Note: The following description applies only to Postgres-XC
To start postgres as a datanode in the background using default values, type:
$ nohup postgres -X >logfile 2>&1 </dev/null &
To start postgres as a coordinator with a specific port, e.g. 1234:
$ postgres -C -p 1234
To connect to this server using psql, specify this port with the -p option:
$ psql -p 1234
or set the environment variable PGPORT:
$ export PGPORT=1234 $ psql
Named run-time parameters can be set in either of these styles:
$ postgres -C -c work_mem=1234 $ postgres -C --work-mem=1234
Either form overrides whatever setting might exist for work_mem in postgresql.conf. Notice that underscores in parameter names can be written as either underscore or dash on the command line. Except for short-term experiments, it's probably better practice to edit the setting in postgresql.conf than to rely on a command-line switch to set a parameter.