CREATE AGGREGATE name ( input_data_type [ , ... ] ) (
SFUNC = sfunc,
STYPE = state_data_type
[ , CFUNC = cfunc ]
[ , FINALFUNC = ffunc ]
[ , INITCOND = initial_condition ]
[ , INITCOLLECT = initial_collection_condition ]
[ , SORTOP = sort_operator ]
)
or the old syntax
CREATE AGGREGATE name (
BASETYPE = base_type,
SFUNC = sfunc,
STYPE = state_data_type
[ , FINALFUNC = ffunc ]
[ , INITCOND = initial_condition ]
[ , SORTOP = sort_operator ]
)Note: The following description applies only to Postgres-XC
CREATE AGGREGATE defines a new aggregate function. Some basic and commonly-used aggregate functions are included with the distribution; they are documented in Section 9.18. If one defines new types or needs an aggregate function not already provided, then CREATE AGGREGATE can be used to provide the desired features.
If a schema name is given (for example, CREATE AGGREGATE myschema.myagg ...) then the aggregate function is created in the specified schema. Otherwise it is created in the current schema.
An aggregate function is identified by its name and input data type(s). Two aggregates in the same schema can have the same name if they operate on different input types. The name and input data type(s) of an aggregate must also be distinct from the name and input data type(s) of every ordinary function in the same schema.
Note: The following description applies only to Postgres-XC
An aggregate function is made from one to maximum 3 ordinary functions: a state transition function sfunc, an optional collection function cfunc, and an optional final calculation function ffunc. These are used as follows:
sfunc( internal-state, next-data-values ) ---> next-internal-state cfunc( internal-state, internal-state ) ---> next-internal-state ffunc( internal-state ) ---> aggregate-value
In Postgres-XC the aggregation works in two different modes.
Two phased aggregation - is used when the entire aggregation takes place on the coordinator node. In first phase called transition phase, Postgres-XC creates a temporary variable of data type stype to hold the current internal state of the aggregate. At each input row, the aggregate argument value(s) are calculated and the state transition function is invoked with the current state value and the new argument value(s) to calculate a new internal state value. After all the rows have been processed, in the second phase or finalization phase the final function is invoked once to calculate the aggregate's return value. If there is no final function then the ending state value is returned as-is.
Three phased aggregation - is used when the process of aggregation is divided between coordinator and data nodes. In this mode, each Postgres-XC data node involved in the query carries out the first phase named transition phase. This phase is similar to the first phase in the two phased aggregation mode discussed above, except that, every data node applies this phase on the rows available at the data node. The result of transition phase is then transferred to the coordinator node. Second phase called collection phase takes place on the coordinator. Postgres-XC coordinator node creates a temporary variable of data type stype to hold the current internal state of the collection phase. For every input from the data node (result of transition phase on that node), the collection function is invoked with the current collection state value and the new transition value (obtained from the data node) to calculate a new internal collection state value. After all the transition values from data nodes have been processed, in the third or finalization phase the final function is invoked once to calculate the aggregate's return value. If there is no final function then the ending collection state value is returned as-is.
Irrespective of the mode used for aggregation, the result of aggregation should be same if the same set of data rows is participating in the aggregate. Postgres-XC planner chooses the cheapest feasible mode of the above two, during planning.
Note: The following description applies only to Postgres-XC
An aggregate function can provide an initial condition, that is, an initial value for the internal transition or collection state value. This is specified and stored in the database as a value of type text, but it must be a valid external representation of a constant of the state value data type. If it is not supplied then the state value starts out null.
Note: The following description applies only to Postgres-XC
If the collection function is declared "strict",
then it cannot be called with null inputs. With such a collection
function, aggregate execution behaves as follows. Null state transition
results are ignored (the function is not called and the previous collection
state value is retained). If the initial state value is null, then at the
first non-null state transition result replaces the collection state
value, and the collection function is invoked at subsequent rows with
all-nonnull transition values.
This is handy for implementing aggregates like max.
If the state transition function is declared "strict",
then it cannot be called with null inputs. With such a transition
function, aggregate execution behaves as follows. Rows with any null input
values are ignored (the function is not called and the previous state value
is retained). If the initial state value is null, then at the first row
with all-nonnull input values, the first argument value replaces the state
value, and the transition function is invoked at subsequent rows with
all-nonnull input values.
This is handy for implementing aggregates like max.
Note that this behavior is only available when
state_data_type
is the same as the first
input_data_type.
When these types are different, you must supply a nonnull initial
condition or use a nonstrict transition function.
Note: The following description applies only to Postgres-XC
If the state transition and/or collection function is not strict, then it will be called unconditionally at each input row, and must deal with null inputs and null transition/collection values for itself. This allows the aggregate author to have full control over the aggregate's handling of null values.
If the final function is declared "strict", then it will not
be called when the ending state value is null; instead a null result
will be returned automatically. (Of course this is just the normal
behavior of strict functions.) In any case the final function has
the option of returning a null value. For example, the final function for
avg returns null when it sees there were zero
input rows.
Aggregates that behave like MIN or MAX can
sometimes be optimized by looking into an index instead of scanning every
input row. If this aggregate can be so optimized, indicate it by
specifying a sort operator. The basic requirement is that
the aggregate must yield the first element in the sort ordering induced by
the operator; in other words:
SELECT agg(col) FROM tab;
must be equivalent to:
SELECT col FROM tab ORDER BY col USING sortop LIMIT 1;
Further assumptions are that the aggregate ignores null inputs, and that
it delivers a null result if and only if there were no non-null inputs.
Ordinarily, a data type's < operator is the proper sort
operator for MIN, and > is the proper sort
operator for MAX. Note that the optimization will never
actually take effect unless the specified operator is the "less
than" or "greater than" strategy member of a B-tree
index operator class.
The name (optionally schema-qualified) of the aggregate function to create.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
An input data type on which this aggregate function operates.
To create a zero-argument aggregate function, write *
in place of the list of input data types. (An example of such an
aggregate is count(*).)
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
In the old syntax for CREATE AGGREGATE, the input data type is specified by a basetype parameter rather than being written next to the aggregate name. Note that this syntax allows only one input parameter. To define a zero-argument aggregate function, specify the basetype as "ANY" (not *).
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The name of the state transition function to be called for each input row. For an N-argument aggregate function, the sfunc must take N+1 arguments, the first being of type state_data_type and the rest matching the declared input data type(s) of the aggregate. The function must return a value of type state_data_type. This function takes the current state value and the current input data value(s), and returns the next state value.
Note: The following description applies only to Postgres-XC
The name of the state collection function to be called for each input row. The sfunc must take 2 arguments, both of them being of type state_data_type. The function must return a value of type state_data_type. This function takes the current collection state value and the current transition value, and returns the next collection state value. If cfunc is omitted for an aggregate, the two phase aggregation mode is used for that aggregate. All the aggregates involed in a query use the same aggregation mode.
The data type for the aggregate's state value.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The name of the final function called to compute the aggregate's result after all input rows have been traversed. The function must take a single argument of type state_data_type. The return data type of the aggregate is defined as the return type of this function. If ffunc is not specified, then the ending state value is used as the aggregate's result, and the return type is state_data_type.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The initial setting for the state value. This must be a string constant in the form accepted for the data type state_data_type. If not specified, the state value starts out null.
Note: The following description applies only to Postgres-XC
The initial setting for the state collection value. This must be a string constant in the form accepted for the data type state_data_type. If not specified, the collection state value starts out null. If the collection function cfunc is not supplied, this parameter is stored but not used.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The associated sort operator for a MIN- or
MAX-like aggregate.
This is just an operator name (possibly schema-qualified).
The operator is assumed to have the same input data types as
the aggregate (which must be a single-argument aggregate).
The parameters of CREATE AGGREGATE can be written in any order, not just the order illustrated above.