| Postgres-XC 1.0.1 Documentation | ||||
|---|---|---|---|---|
| Prev | Fast Backward | Chapter 18. Client Authentication | Fast Forward | Next |
The following subsections describe the authentication methods in more detail.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
When trust authentication is specified, Postgres-XC assumes that anyone who can connect to the server is authorized to access the database with whatever database user name they specify (even superuser names). Of course, restrictions made in the database and user columns still apply. This method should only be used when there is adequate operating-system-level protection on connections to the server.
trust authentication is appropriate and very convenient for local connections on a single-user workstation. It is usually not appropriate by itself on a multiuser machine. However, you might be able to use trust even on a multiuser machine, if you restrict access to the server's Unix-domain socket file using file-system permissions. To do this, set the unix_socket_permissions (and possibly unix_socket_group) configuration parameters as described in Section 17.3. Or you could set the unix_socket_directory configuration parameter to place the socket file in a suitably restricted directory.
Setting file-system permissions only helps for Unix-socket connections. Local TCP/IP connections are not restricted by file-system permissions. Therefore, if you want to use file-system permissions for local security, remove the host ... 127.0.0.1 ... line from pg_hba.conf, or change it to a non-trust authentication method.
trust authentication is only suitable for TCP/IP connections if you trust every user on every machine that is allowed to connect to the server by the pg_hba.conf lines that specify trust. It is seldom reasonable to use trust for any TCP/IP connections other than those from localhost (127.0.0.1).
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The password-based authentication methods are md5 and password. These methods operate similarly except for the way that the password is sent across the connection, namely MD5-hashed and clear-text respectively.
If you are at all concerned about password "sniffing" attacks then md5 is preferred. Plain password should always be avoided if possible. However, md5 cannot be used with the db_user_namespace feature. If the connection is protected by SSL encryption then password can be used safely (though SSL certificate authentication might be a better choice if one is depending on using SSL).
Postgres-XC database passwords are separate from operating system user passwords. The password for each database user is stored in the pg_authid system catalog. Passwords can be managed with the SQL commands CREATE USER and ALTER ROLE, e.g., CREATE USER foo WITH PASSWORD 'secret'. If no password has been set up for a user, the stored password is null and password authentication will always fail for that user.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
GSSAPI is an industry-standard protocol for secure authentication defined in RFC 2743. Postgres-XC supports GSSAPI with Kerberos authentication according to RFC 1964. GSSAPI provides automatic authentication (single sign-on) for systems that support it. The authentication itself is secure, but the data sent over the database connection will be sent unencrypted unless SSL is used.
When GSSAPI uses Kerberos, it uses a standard principal in the format servicename/hostname@realm. For information about the parts of the principal, and how to set up the required keys, see Section 18.3.5.
GSSAPI support has to be enabled when Postgres-XC is built; see Chapter 15 for more information.
The following configuration options are supported for GSSAPI:
If set to 1, the realm name from the authenticated user principal is included in the system user name that's passed through user name mapping (Section 18.2). This is useful for handling users from multiple realms.
Allows for mapping between system and database user names. See Section 18.2 for details. For a Kerberos principal username/hostbased@EXAMPLE.COM, the user name used for mapping is username/hostbased if include_realm is disabled, and username/hostbased@EXAMPLE.COM if include_realm is enabled.
Sets the realm to match user principal names against. If this parameter is set, only users of that realm will be accepted. If it is not set, users of any realm can connect, subject to whatever user name mapping is done.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
SSPI is a Windows technology for secure authentication with single sign-on. Postgres-XC will use SSPI in negotiate mode, which will use Kerberos when possible and automatically fall back to NTLM in other cases. SSPI authentication only works when both server and client are running Windows.
When using Kerberos authentication, SSPI works the same way GSSAPI does; see Section 18.3.3 for details.
The following configuration options are supported for SSPI:
If set to 1, the realm name from the authenticated user principal is included in the system user name that's passed through user name mapping (Section 18.2). This is useful for handling users from multiple realms.
Allows for mapping between system and database user names. See Section 18.2 for details.
Sets the realm to match user principal names against. If this parameter is set, only users of that realm will be accepted. If it is not set, users of any realm can connect, subject to whatever user name mapping is done.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
Note: Native Kerberos authentication has been deprecated and should be used only for backward compatibility. New and upgraded installations are encouraged to use the industry-standard GSSAPI authentication method (see Section 18.3.3) instead.
Kerberos is an industry-standard secure authentication system suitable for distributed computing over a public network. A description of the Kerberos system is beyond the scope of this document; in full generality it can be quite complex (yet powerful). The Kerberos FAQ or MIT Kerberos page can be good starting points for exploration. Several sources for Kerberos distributions exist. Kerberos provides secure authentication but does not encrypt queries or data passed over the network; for that use SSL.
Postgres-XC supports Kerberos version 5. Kerberos support has to be enabled when Postgres-XC is built; see Chapter 15 for more information.
Postgres-XC operates like a normal Kerberos service. The name of the service principal is servicename/hostname@realm.
servicename can be set on the server side using the krb_srvname configuration parameter, and on the client side using the krbsrvname connection parameter. (See also Section 30.1.) The installation default can be changed from the default postgres at build time using ./configure --with-krb-srvnam=whatever. In most environments, this parameter never needs to be changed. However, it is necessary when supporting multiple Postgres-XC installations on the same host. Some Kerberos implementations might also require a different service name, such as Microsoft Active Directory which requires the service name to be in upper case (POSTGRES).
hostname is the fully qualified host name of the server machine. The service principal's realm is the preferred realm of the server machine.
Client principals must have their Postgres-XC database user name as their first component, for example pgusername@realm. Alternatively, you can use a user name mapping to map from the first component of the principal name to the database user name. By default, the realm of the client is not checked by Postgres-XC. If you have cross-realm authentication enabled and need to verify the realm, use the krb_realm parameter, or enable include_realm and use user name mapping to check the realm.
Make sure that your server keytab file is readable (and preferably only readable) by the Postgres-XC server account. (See also Section 16.1.) The location of the key file is specified by the krb_server_keyfile configuration parameter. The default is /usr/local/pgsql/etc/krb5.keytab (or whatever directory was specified as sysconfdir at build time).
The keytab file is generated by the Kerberos software; see the Kerberos documentation for details. The following example is for MIT-compatible Kerberos 5 implementations:
kadmin% ank -randkey postgres/server.my.domain.org kadmin% ktadd -k krb5.keytab postgres/server.my.domain.org
When connecting to the database make sure you have a ticket for a principal matching the requested database user name. For example, for database user name fred, principal fred@EXAMPLE.COM would be able to connect. To also allow principal fred/users.example.com@EXAMPLE.COM, use a user name map, as described in Section 18.2.
If you use mod_auth_kerb and mod_perl on your Apache web server, you can use AuthType KerberosV5SaveCredentials with a mod_perl script. This gives secure database access over the web, with no additional passwords required.
The following configuration options are supported for Kerberos:
Allows for mapping between system and database user names. See Section 18.2 for details.
If set to 1, the realm name from the authenticated user principal is included in the system user name that's passed through user name mapping (Section 18.2). This is useful for handling users from multiple realms.
Sets the realm to match user principal names against. If this parameter is set, only users of that realm will be accepted. If it is not set, users of any realm can connect, subject to whatever user name mapping is done.
Sets the host name part of the service principal. This, combined with krb_srvname, is used to generate the complete service principal, that is krb_srvname/krb_server_hostname@REALM. If not set, the default is the server host name.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The ident authentication method works by obtaining the client's operating system user name from an ident server and using it as the allowed database user name (with an optional user name mapping). This is only supported on TCP/IP connections.
Note: When ident is specified for a local (non-TCP/IP) connection, peer authentication (see Section 18.3.7) will be used instead.
The following configuration options are supported for ident:
Allows for mapping between system and database user names. See Section 18.2 for details.
The "Identification Protocol" is described in RFC 1413. Virtually every Unix-like operating system ships with an ident server that listens on TCP port 113 by default. The basic functionality of an ident server is to answer questions like "What user initiated the connection that goes out of your port X and connects to my port Y?". Since Postgres-XC knows both X and Y when a physical connection is established, it can interrogate the ident server on the host of the connecting client and can theoretically determine the operating system user for any given connection.
The drawback of this procedure is that it depends on the integrity of the client: if the client machine is untrusted or compromised, an attacker could run just about any program on port 113 and return any user name he chooses. This authentication method is therefore only appropriate for closed networks where each client machine is under tight control and where the database and system administrators operate in close contact. In other words, you must trust the machine running the ident server. Heed the warning:
The Identification Protocol is not intended as an authorization or access control protocol. | ||
| --RFC 1413 | ||
Some ident servers have a nonstandard option that causes the returned user name to be encrypted, using a key that only the originating machine's administrator knows. This option must not be used when using the ident server with Postgres-XC, since Postgres-XC does not have any way to decrypt the returned string to determine the actual user name.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
The peer authentication method works by obtaining the client's operating system user name from the kernel and using it as the allowed database user name (with optional user name mapping). This method is only supported on local connections.
The following configuration options are supported for peer:
Allows for mapping between system and database user names. See Section 18.2 for details.
Peer authentication is only available on operating systems providing
the getpeereid() function, the SO_PEERCRED
socket parameter, or similar mechanisms. Currently that includes
Linux,
most flavors of BSD including
Mac OS X,
and Solaris.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
This authentication method operates similarly to password except that it uses LDAP as the password verification method. LDAP is used only to validate the user name/password pairs. Therefore the user must already exist in the database before LDAP can be used for authentication.
LDAP authentication can operate in two modes. In the first mode, the server will bind to the distinguished name constructed as prefix username suffix. Typically, the prefix parameter is used to specify cn=, or DOMAIN\ in an Active Directory environment. suffix is used to specify the remaining part of the DN in a non-Active Directory environment.
In the second mode, the server first binds to the LDAP directory with a fixed user name and password, specified with ldapbinduser and ldapbinddn, and performs a search for the user trying to log in to the database. If no user and password is configured, an anonymous bind will be attempted to the directory. The search will be performed over the subtree at ldapbasedn, and will try to do an exact match of the attribute specified in ldapsearchattribute. If no attribute is specified, the uid attribute will be used. Once the user has been found in this search, the server disconnects and re-binds to the directory as this user, using the password specified by the client, to verify that the login is correct. This method allows for significantly more flexibility in where the user objects are located in the directory, but will cause two separate connections to the LDAP server to be made.
The following configuration options are supported for LDAP:
Name or IP of LDAP server to connect to.
Port number on LDAP server to connect to. If no port is specified, the LDAP library's default port setting will be used.
Set to 1 to make the connection between Postgres-XC and the LDAP server use TLS encryption. Note that this only encrypts the traffic to the LDAP server — the connection to the client will still be unencrypted unless SSL is used.
String to prepend to the user name when forming the DN to bind as, when doing simple bind authentication.
String to append to the user name when forming the DN to bind as, when doing simple bind authentication.
Root DN to begin the search for the user in, when doing search+bind authentication.
DN of user to bind to the directory with to perform the search when doing search+bind authentication.
Password for user to bind to the directory with to perform the search when doing search+bind authentication.
Attribute to match against the user name in the search when doing search+bind authentication.
Note: Since LDAP often uses commas and spaces to separate the different parts of a DN, it is often necessary to use double-quoted parameter values when configuring LDAP options, for example:
ldapserver=ldap.example.net ldapprefix="cn=" ldapsuffix=", dc=example, dc=net"
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
This authentication method operates similarly to password except that it uses RADIUS as the password verification method. RADIUS is used only to validate the user name/password pairs. Therefore the user must already exist in the database before RADIUS can be used for authentication.
When using RADIUS authentication, an Access Request message will be sent to the configured RADIUS server. This request will be of type Authenticate Only, and include parameters for user name, password (encrypted) and NAS Identifier. The request will be encrypted using a secret shared with the server. The RADIUS server will respond to this server with either Access Accept or Access Reject. There is no support for RADIUS accounting.
The following configuration options are supported for RADIUS:
The name or IP address of the RADIUS server to connect to. This parameter is required.
The shared secret used when talking securely to the RADIUS server. This must have exactly the same value on the Postgres-XC and RADIUS servers. It is recommended that this be a string of at least 16 characters. This parameter is required.
Note: The encryption vector used will only be cryptographically strong if Postgres-XC is built with support for OpenSSL. In other cases, the transmission to the RADIUS server should only be considered obfuscated, not secured, and external security measures should be applied if necessary.
The port number on the RADIUS server to connect to. If no port is specified, the default port 1812 will be used.
The string used as NAS Identifier in the RADIUS requests. This parameter can be used as a second parameter identifying for example which database user the user is attempting to authenticate as, which can be used for policy matching on the RADIUS server. If no identifier is specified, the default postgresql will be used.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
This authentication method uses SSL client certificates to perform authentication. It is therefore only available for SSL connections. When using this authentication method, the server will require that the client provide a valid certificate. No password prompt will be sent to the client. The cn (Common Name) attribute of the certificate will be compared to the requested database user name, and if they match the login will be allowed. User name mapping can be used to allow cn to be different from the database user name.
The following configuration options are supported for SSL certificate authentication:
Allows for mapping between system and database user names. See Section 18.2 for details.
Note: The following description applies both to Postgres-XC and PostgreSQL if not described explicitly.
This authentication method operates similarly to password except that it uses PAM (Pluggable Authentication Modules) as the authentication mechanism. The default PAM service name is postgresql. PAM is used only to validate user name/password pairs. Therefore the user must already exist in the database before PAM can be used for authentication. For more information about PAM, please read the Linux-PAM Page and the Solaris PAM Page.
The following configuration options are supported for PAM:
PAM service name.
Note: If PAM is set up to read /etc/shadow, authentication will fail because the Postgres-XC server is started by a non-root user. However, this is not an issue when PAM is configured to use LDAP or other authentication methods.